Operation Manual


2 step motors (3 hands, 1/1 second chronograph maximum to 60 seconds)

ADJUSTING HOUR & MINUTE HANDS

1. Make sure the second hand reaches 60 second position

2. Pull the crow out to position 2.

3. Turn the crown clockwise or counter clockwise to adjust hour, minute and chronograph hands.

4. Push the crown back in to position 1.

 

ADJUSTING CHRONOGRAPH MINUTE & SECOND HANDS

1. Pull the crown out to position 2.

2. Press pusher 'A' to rotate the stopwatch second and minute hand positions in a counter clockwise direction. Continue to press the pusher until the hands reach your desired position.

3. Press pusher 'B' to rotate the stopwatch second and minute hand positions in a clockwise direction. Continue to press the pusher until the hands reach your desired position.

4. Push the crown back in to position 1.

OPERATING CHRONOGRAPH FUNCTION (STOPWATCH)

1. Make sure the stopwatch second hand is set to 60 second position.

2. Press pusher 'A' to START the stopwatch.

3. Press pusher 'A' again to STOP the stopwatch.

4. Press pusher 'B' to RESET the stopwatch.

 

RS-511

Movement: Seiko Instruments TMI Cal. VD54B, quartz chronograph
Recommended Battery: SR920SW (SEIZAIKEN)
Operating Temperature: 23°F (-5°C) to 122°F (+50°C).

Helpful References

Watch Care & Maintenance

Warranty Terms

Product Registration